AR-15 SUPER SEMI-AUTOMATIC TRIGGER

Features:

• Semi-automatic only version of a select fire trigger that Geissele produces for customers in the U.S. Special Operations community 
• Non-adjustable combat trigger, not a match trigger 
• 4.5 lb Trigger Pull, 2.5 lbs on the 1st stage and 2 lbs on the 2nd 
• Trigger and hammer are made from quality tool steel 
• Sear surfaces are cut by a wire EDM machine 
• Full force hammer spring 
• The hammer is lighter than a standard AR15 hammer 
• Crane NSWC Safety Certification 
• Does not fit HK416 weapons with a firing pin safety

Benefits: 

• Suitable for CQB and mid-range carbine work 
• Also functions well for Squad Designated Marksmen rifles 
• The trigger allows the shooter to slap through the trigger pull on close in shots, but also set up a long range shot with a crisp trigger break 
• Simple design that is very similar to the original M16 trigger, with the same number of parts 
• No adjustment screws to come loose 
• All springs are captive; they will not get lost during disassembly or in the field 
• The entire trigger can be disassembled for cleaning (no rivets or staked parts)
• The trigger can be installed without removing the safety 
• Sear engagement is pre-set from the factory 
• Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with rudimentary tools 
• Triggers come with a slave pin for the trigger / disconnector assembly for easy installation 
• The SSA is a 2 stage trigger where there is generous overlap of the sear surfaces which contributes to safety and a low tendency of any inadvertent movement of the trigger to discharge the weapon 
• Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces 
• The trigger is designed to operate in dusty, abrasive environments that cause wear