Law Enforcement Supplies

Best Sellers
  1. Tactical Bacon
    Item#:
    100-007-256  
    Our Price:
    $19.99
    Description:
    If you’re hunkered down in your bunker during the Zombie Apocalypse, and you’re getting tired of MRE’s and freeze-dried food, just open a can of mouth-watering Tactical Bacon to add flavor to your next meal. Perfect as a snack, breakfast on a camping trip, or as a long-term-storable backup food source to keep in your vehicle or bush plane. With a 10-year shelf life, it may outlast you. Pre-cooked and ready to eat. Gluten-free. Mfg: Cmmg SPECS: Pre-cooked pork, with salt, sugar, sodium phosphates, sodium erythorbate, sodium nitrite, water, and smoke flavoring. 9 oz. (255g) net wt. Approximately 18 servings (3 slices each) per can.
  2. Balm Shot Lip Balm - Classic Lip Balm
    Item#:
    100-009-440  
    Our Price:
    $3.49
    Description:
    Balm Shot’s Classic Lip Balm is made with FDA-approved beeswax, natural oils and vitamin E, and is “loaded” into a non-firing 20-gauge shotshell. Provides a sun protection factor (SPF) of 15 to help prevent sunburn and keep your lips chap-free at the range, or anywhere. Even has a refreshing mint taste. Please note that this product has not been approved by the TSA. Mfg: Balmshot, Llc.
  3. Cosine Indicator - Mil-Spec Cosine Indicator
    Item#:
    100-003-770  
    Our Price:
    $179.99
    Description:
    Improves Accuracy When Shooting Up Or Down Hill
  4. Cosine Indicator - Angle Cosine Indicator
    Item#:
    100-001-423  
    Our Price:
    $139.99
    Description:
    Improves Accuracy When Shooting Up Or Down Hill
  5. Low Force Trainer - Decapping Rod
    Item#:
    084-000-365  
    Our Price:
    $19.99
    Description:
    Force on force training Simulates expensive less-lethal bean bag rounds with reduced cost and lower risk of training injuries  Flight characteristics are similar to short-range, field-use munitions; 15 yd maximum range  Impact is less significant than Simunition®/ Airsoft rounds; protective gear is still recommended  Uses readily available No. 209 shotshell primers for propulsion (sold below)  Available in 37mm/40mm rimmed and 37mm rimless configurations  Shells are made of durable Delrin®; 5 ½" (14cm) OAL  Kits include carry case, 6 reloadable shells, 12 plastic/silicone reusable projectiles, one load Mfg: Brownells
  6. Low Force Trainer - Projectile 25 Pack
    Item#:
    084-000-366  
    Our Price:
    $15.00
    Description:
    Force on force training Simulates expensive less-lethal bean bag rounds with reduced cost and lower risk of training injuries  Flight characteristics are similar to short-range, field-use munitions; 15 yd maximum range  Impact is less significant than Simunition®/ Airsoft rounds; protective gear is still recommended  Uses readily available No. 209 shotshell primers for propulsion (sold below)  Available in 37mm/40mm rimmed and 37mm rimless configurations  Shells are made of durable Delrin®; 5 ½" (14cm) OAL  Kits include carry case, 6 reloadable shells, 12 plastic/silicone reusable projectiles, one load Mfg: Brownells

View All Law Enforcement Supplies »

Law Enforcement Supply

Related Items
  1. Ar-15/M16 Oversized Engraved Magazine Release - Mag Release, Biohazard
    Item#:
    100-006-313  
    Our Price:
    $19.99
    Description:
    Extended length, machined aluminum button has an oversized contact pad for fast, easy operation under stress. Comes laser etched with a distinctive logo that reflects your personality and dresses up your rifle. Drop-in replacement for the original release; uses the factory magazine release spring. Logos will not fade or wear off. Available with patriotic American Flag, aggressive death’s-head, international Biohazard symbol, or “Infidel” logo. Mfg: Tactical Supply Depot SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5⁄8" (1.6cm) long, with 5⁄8" diameter pad. Fits AR-15/M16 with mil-spec magazine release.
  2. Ar-15/M16 Oversized Engraved Magazine Release - Mag Release, American Flag
    Item#:
    100-005-831  
    Our Price:
    $19.99
    Description:
    Extended length, machined aluminum button has an oversized contact pad for fast, easy operation under stress. Comes laser etched with a distinctive logo that reflects your personality and dresses up your rifle. Drop-in replacement for the original release; uses the factory magazine release spring. Logos will not fade or wear off. Available with patriotic American Flag, aggressive death’s-head, international Biohazard symbol, or “Infidel” logo. Mfg: Tactical Supply Depot SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5⁄8" (1.6cm) long, with 5⁄8" diameter pad. Fits AR-15/M16 with mil-spec magazine release.
  3. Ar-15/M16/Ar-Style .308 Extended Pivot/Takedown Pins - Ar-15/M16 Extended P/T Pin Set, No Logo
    Item#:
    100-010-744  
    Our Price:
    $19.99
    Description:
    Precision-machined aluminum pivot and takedown pins have easy-to-grasp, oversized heads with knurled edges to aid in fast pin removal for separation of receiver halves. Eliminates the need for a pin punch that can slip and scratch the receiver or get lost. Plus, the distinctive American Flag, Punisher, Biohazard, Infidel, or Jolly Roger logo gives your rifle a personalized, one-of-a-kind look. Also available in plain black, without logo. Pins lock into place as securely as factory pins. Mfg: Tactical Supply Depot SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Sold as a set with the same logo on both pins. AR-15/M16 pins fit mil-spec receivers with .250" (6.3mm) diameter pivot/takedown pin holes. AR-Style .308 pins fit DPMS LR-308 and Remington SR-25 rifles.
  4. Ar-15/M16/Ar-Style .308 Extended Pivot/Takedown Pins - Ar-308 Extended P/T Pin Set, No Logo
    Item#:
    100-010-745  
    Our Price:
    $19.99
    Description:
    Precision-machined aluminum pivot and takedown pins have easy-to-grasp, oversized heads with knurled edges to aid in fast pin removal for separation of receiver halves. Eliminates the need for a pin punch that can slip and scratch the receiver or get lost. Plus, the distinctive American Flag, Punisher, Biohazard, Infidel, or Jolly Roger logo gives your rifle a personalized, one-of-a-kind look. Also available in plain black, without logo. Pins lock into place as securely as factory pins. Mfg: Tactical Supply Depot SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Sold as a set with the same logo on both pins. AR-15/M16 pins fit mil-spec receivers with .250" (6.3mm) diameter pivot/takedown pin holes. AR-Style .308 pins fit DPMS LR-308 and Remington SR-25 rifles.
  5. Ar-15/M16/Ar-Style .308 Extended Pivot/Takedown Pins - Ar-308 Extended P/T Pin Set, Infidel
    Item#:
    100-010-712  
    Our Price:
    $24.99
    Description:
    Precision-machined aluminum pivot and takedown pins have easy-to-grasp, oversized heads with knurled edges to aid in fast pin removal for separation of receiver halves. Eliminates the need for a pin punch that can slip and scratch the receiver or get lost. Plus, the distinctive American Flag, Punisher, Biohazard, Infidel, or Jolly Roger logo gives your rifle a personalized, one-of-a-kind look. Also available in plain black, without logo. Pins lock into place as securely as factory pins. Mfg: Tactical Supply Depot SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Sold as a set with the same logo on both pins. AR-15/M16 pins fit mil-spec receivers with .250" (6.3mm) diameter pivot/takedown pin holes. AR-Style .308 pins fit DPMS LR-308 and Remington SR-25 rifles.
  6. Ar-15/M16/Ar-Style .308 Extended Pivot/Takedown Pins - Ar-308 Extended P/T Pin Set, Biohazard
    Item#:
    100-010-491  
    Our Price:
    $24.99
    Description:
    Precision-machined aluminum pivot and takedown pins have easy-to-grasp, oversized heads with knurled edges to aid in fast pin removal for separation of receiver halves. Eliminates the need for a pin punch that can slip and scratch the receiver or get lost. Plus, the distinctive American Flag, Punisher, Biohazard, Infidel, or Jolly Roger logo gives your rifle a personalized, one-of-a-kind look. Also available in plain black, without logo. Pins lock into place as securely as factory pins. Mfg: Tactical Supply Depot SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Sold as a set with the same logo on both pins. AR-15/M16 pins fit mil-spec receivers with .250" (6.3mm) diameter pivot/takedown pin holes. AR-Style .308 pins fit DPMS LR-308 and Remington SR-25 rifles.

View All Law Enforcement Supply »


Ammunition
  1. 5.7x28mm Dummy Ammunition
    Item#:
    119-000-069  
    Our Price:
    $84.99
    Description:
    FNH 5.7x28mm Dummy Rounds in 50 round quantities. A great, safe option for training with your FNH Five seven or PS90. Packaged in a 50 round box, these dummies accommodate the large capacities of FNH firearms. Mfg: Fnh Usa
  2.  
  3.  

Shopping for Law Enforcement Supplies? Police Store carries the widest selection at the best prices on the web. Our selection of 46 Law Enforcement Supplies and Law Enforcement Supply represents the best of the best, on sale at prices from $3.49 to $439.99. There's a reason we're the top online seller of tactical gear and police officer equipment: we love it! We provide our customers with top-quality products, unbeatable prices, and dedicated customer service every day. We love the products we sell, and we know you will, too. We provide a 100% satisfaction guarantee with all of our products, so if you aren't satisfied with your Law Enforcement Supplies for any reason, let us know right away. Browse through our selection of 46 Law Enforcement Supplies and place your order online or by phone when you find what you need. Customer service associates are standing by to answer your questions about our tactical gear and police officer equipment. We're here to help!